Cookie Img

Project Report On Toughened Glass (Eiri-1065)

Project Report On Toughened Glass (Eiri-1065)
Project Report On Toughened Glass (Eiri-1065)
Product Code : Project Report
Product Description
Project Report On Toughened Glass (Eiri-1065)
Toughened glass is a type of soda-lime-silica glass with a sheet thickness 4-12 mm. The sheet has a central tensile stress of 500-1200 kg/cm2 and a ratio of surface compressive stress to central tensile stress of 2:1 to 4:1. The article is toughened by heat exchange with an oil (or chilled air) in which these is maintained from 0.01 - 0.07% liquid. The boiling point liquid may be an organic liquid such as carbon tetrachloride, methanol, benzene, toluene, trimethyl alcohol, ethyl alcohol or Xylene etc. The toughened glass is described as a type of glass which has been mechanically strenght by a thermal process in which a layer of compression has been introduced at the surface. There are several glass items introduced into early ages of the century. Toughened safety glass (float or polished) is produced by subjecting glass to a process of heating and rapid cooling so as to induce high compressive stresses in the  surface sones balanced by high tension in the central place. This treatment endows the glass with greatly increased resistance to external forces, such as  mechanical loading and thermal shock. If toughened safety glass is fractured, it gives fragments which are less liable to cause severe cuts than fragments of ordinary glass. Thus toughened safety glass, if fractured, disintegrates into small pieces and in addition, its liability to fracture under the action of external forces or changes of temperature is greatly reduced.
Cost Estimation
Plant Capacity 2000 sq.ft./Day
Land & Building (Area 6000 sq.mt.)  Rs. 4.92 Cr.
Plant & Machinery  Rs. 1.75 Cr.        
W.C. for 2 Months  Rs. 6.36 Cr.          
Total Capital Investment  Rs. 13.92 Cr.             
Rate of Return  53%  
Break Even Point 34%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Contact Us

4449, Nai Sarak, Main Road, Delhi, Delhi, 110006, India
Phone :91-11-23947058